RUS

ENG

Search

Low-carbon Wires

Cold-formed reinforcing steel B500C for concrete construction reinforcement

GOST R 52544-2006

Application:

The wire is designed for concrete construction reinforcement; it is produced with three-sided die-rolled section.

Geometries of reinforcing steel:

Profile number (nominal diameter, d)

Height of lug, mm

Pitch of lug, mm

Nominal area of cross-section

 Fn, mm2

Relative area of profile’s transverse ribs deformation fR,

not less than

Weight of 1 running meter, g

6

0.30-0.60

2.4-2.6

28.3±1.3

0,039

222±10

8

0.40-0.80

3.2-8.0

50.3±2.3

0,045

395±18

10

0.50-1.00

4.0-10.0

78.5±3.5

0,052

616±28

 

Mechanical properties of reinforcing steel:

Tensile strength, δt, N/mm2 , not less than

Conventional yield strength,δ0,2 ,N/mm2 , not less than

Ratio  δt/δ0,2

Total relative elongation at maximum stress δmax , %

One-fold twist around 3dn diameter arbor in cold state

не менее

550

500

1,05

2,5

1800

The wire is shipped on spools or in heavy weight coils of weight up to 1000 kg.


In case you have detected any malfunctions or errors while working with the catalogue please decribe a problem and e-mail it to us.

Coldformed reinforcing steel B500C for concrete construction reinforcement GOST R 525442006