Low-carbon Indented Steel Wire for Concrete Construction Reinforcement (intermediate diameters)
Low-carbon indented steel wire of diameters 3,8 and 4,8 mm, produced according to ТU 14-1-5572-2008, is intended for concrete construction reinforcement and manufacture of brick welded mesh as an alternative to wire with the diameter of 4 and 5 mm according to GOST 6727-80 without recalculation respectively (based on the certification tests carried out by Research Institute of Reinforced Concrete – certificate GOST Р № РОСС RU.0001.11АЯ12 ). Only Cherepovets Plant JSC “Severstal-metiz” has the right to manufacture the wire according to the said technical specifications.
Certified low-carbon indented steel wire of 3,8 and 4,8mm diameters instead of 4 and 5 mm diameters ensures 11% and 8% reduction of metal weight in reinforced concrete products and meshes respectively.
Depth of dent,mm
Maxdent depth deviation,mm
Max pitch deviation, mm
Length of lug B, mm
Nominal diameter, d,mm
Stress equal to yield strength, kgf
Number of bends
Relative elongation, %, not less than
Linear density, kg, not more than
Inside coil diameter, not less than, mm
Heavy weight coil
In case you have detected any malfunctions or errors while working with the catalogue please decribe a problem and e-mail it to us.
Lowcarbon Indented Steel Wire for Concrete Construction Reinforcement (intermediate diameters)